View previous topic :: View next topic |
Author |
Message |
Brucech
Joined: 21 Aug 2017 Posts: 41 Location: Perthshire
|
Posted: Thu Mar 19, 2020 12:48 pm Post subject: Rimmer stainless steel exhaust system LR1126SS |
|
|
I purchased this system earlier this week & on arrival the tail pipe fits perfectly but the back box is 3-4 inches too long - before we start to cut this has anyone any experience of the system. _________________ B Chisholm |
|
Back to top |
|
|
romanrob
Joined: 19 May 2006 Posts: 258 Location: SW London
|
Posted: Sat Mar 21, 2020 8:45 pm Post subject: |
|
|
Mine came from Rimmers, I didn't have to cut anything, bolted it straight on _________________ Rob
GB065 - since 2002
Currently on my 2nd 50th RR V8 GEMS
Nanocom unlocked for GEMS
Formerly a 50th RR, 200TDi CSW, and a SIII 2.25 Petrol |
|
Back to top |
|
|
V8GPC
Joined: 03 Apr 2016 Posts: 265 Location: Manchester
|
Posted: Mon Mar 23, 2020 6:44 am Post subject: |
|
|
looking at the rimmer bros website LR1126SS has the following info
Specifications and additional product information
Defender 83-06 - 90 ONLY All 3.9L V8 50th anniversary models with catalyst 1998 on - 2 piece, Cat Back - Quantity Required - 1
So should fit without a problem.
I'd get back in touch with your supplier. |
|
Back to top |
|
|
Brucech
Joined: 21 Aug 2017 Posts: 41 Location: Perthshire
|
Posted: Mon Mar 23, 2020 9:43 am Post subject: |
|
|
Thanks - my 50th is a Japanese version which I’ve had for 2 years now so don’t know if the exhaust has been changed somehow over the years. We replaced the middle section last year with no issue - we’re cutting and shutting to make fit so a bit of work but should be OK. _________________ B Chisholm |
|
Back to top |
|
|
romanrob
Joined: 19 May 2006 Posts: 258 Location: SW London
|
Posted: Mon Mar 23, 2020 9:22 pm Post subject: |
|
|
This was what I got:
https://rimmerbros.com/Item--i-LR1126SS _________________ Rob
GB065 - since 2002
Currently on my 2nd 50th RR V8 GEMS
Nanocom unlocked for GEMS
Formerly a 50th RR, 200TDi CSW, and a SIII 2.25 Petrol |
|
Back to top |
|
|
romanrob
Joined: 19 May 2006 Posts: 258 Location: SW London
|
Posted: Mon Mar 23, 2020 9:27 pm Post subject: |
|
|
Though I appreciate that doesn't add anything to the conversation, since it seems to be what you have. This version is the same middle and rear as the original. There are other versions which have different dimensions middle and rear, but work when bought together - it sounds like you now have a mix of the two. _________________ Rob
GB065 - since 2002
Currently on my 2nd 50th RR V8 GEMS
Nanocom unlocked for GEMS
Formerly a 50th RR, 200TDi CSW, and a SIII 2.25 Petrol |
|
Back to top |
|
|
Brucech
Joined: 21 Aug 2017 Posts: 41 Location: Perthshire
|
Posted: Tue Mar 24, 2020 8:03 pm Post subject: |
|
|
Thanks for the info - we’ll have a look when we get the Defender out on lockdown on a few weeks. _________________ B Chisholm |
|
Back to top |
|
|
|